We provide solutions no matter what size your installation

HDMI cables and products are a dime a dozen, what makes Digital Life^® TRADE MADE HDMI so good?

Very simply all our HDMI products have been passed and issued with an (ATC) Authorized Test Center certificate. All our HDMI products must pass the testing requirements set out by HDMI Licensing, LLC. This is your assurance and guarantee that our HDMI products will work to specification. All our HDMI cables meet the latest specification of HDMI high Speed with Ethernet. Our HDMI Cables meet 3D requirements and 4k resolution with audio return channel. Every HDMI product we make has 24K gold connectivity ensuring long lasting connection.

Our HDMI factories are monitored for quality control regularly. We constantly change our quality specifications as technology changes. This ensures you the customer get the “Latest” in HDMI technology. If you see the Digital Life^® TRADE MADE logo’s you know you can trust our products to work every time.

On the right is a diagram showing you what’s inside a HDMI connector - Please remember these are fragile - Your pliers or ripping them through walls can do damage, yes we’ve seen it happen.

• Pins 1 through 9 carry the three TMDS data channels (Transition Minimized Differential Signaling - the technology that allows DVI and HDMI to send high-speed digital data), three pins per channel. TMDS data includes both video and audio information, and each channel has three separate lines for + values, - values, and a ground or data shield.
• Pins 10 through 12 carry data for the TMDS clock channel, which helps keep the signals in synchronization. As with the TMDS data channels, there are separate lines for + values, - values, and a data shield.
• Pin 13 is carries the CEC (Consumer Electronics Control) channel, used for sending command and control data between connected devices.
• Pin 14 is reserved for future use.
• Pins 15 and 16 are dedicated to the DDC (Display Data Channel), used for communicating EDID (Extended Display Identification Channel) information between devices.
• Pin 17 is a data shield for the CEC and DDC channels.
• Pin 18 carries a low-voltage (+5V) power supply.
• Pin 19 is the Hot Plug Detect, dedicated to monitoring power up/down and plug/unplug events.